39 |
|
|
|
|
|
6600 Series |
|
|
|
|
|
General Description | Current and Voltage Rating | Interrupting Capacity | Approvals* |
|
|
• Sub-miniature bimetal thermostat | • | • | • UL recognized |
|
• 8-PIN DIP package configuration | 0.50 to 16.0 amps at 240 VAC, 50/60 Hz | 1000 amps | • CSA certified |
|
• Snap-acting trip mechanism increases operational life | • 0.50 to 16 amps at 50 VDC |
| • VDE approved |
|
• Single pole, single throw, automatic reset | • 0.50 to 12 amps at 24 VDC (VDE) |
|
|
|
|
|
|
|
|
|
|
6700 Series |
|
|
|
|
|
General Description | Current and Voltage Rating | Interrupting Capacity | Approvals* |
|
|
• Sub-miniature bimetal thermostat | • | • | • |
|
|
• TO-220 package configuration | 2.5 to 20.0 amps at 240 VAC, 50/60 Hz | 1000 amps | UL recognized |
|
• Snap-acting trip mechanism increases operational life | • 2.5 to 20 amps at 50 VDC |
| • CSA certified |
|
• Single pole, single throw, automatic reset |
|
| • TUV approved |
|
• VDE approved “P” version is available |
|
| • CE compliant |
|
|
|
| IAR/IUR/IER/CUR/CER |
|
General Description | IAL/IUL/IEL |
|
|
|
|
• 1U (1RU) hydraulic magnetic circuit breaker |
|
|
|
|
|
• Low-profile design | General Description |
|
|
|
|
• Auxiliary switch options available for alarm signaling | • IEL versions meet IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950 and VDE 0730, 0804 and 0805 |
| • Multi-pole options with multi or single handle |
|
|
|
Current and Voltage Rating | • Auxiliary switch options |
|
|
|
|
• | • Snap-in mounting option |
|
|
|
|
2 to 50 amps at 80 VDC and 250 VAC | • Mid-trip handle option |
|
|
|
|
• 2 to 30 amps, 120/240VAC (2 poles) | • Various actuator options |
|
|
|
|
| • Dual frequency delay options |
|
|
|
|
Interrupting Capacity |
|
|
|
|
|
• | Max. Poles |
|
|
|
|
5000 amps, 65VDC | • 6 |
|
|
|
|
• 5000 amps, 80VDC |
|
|
|
|
|
• 2000 amps, 250VAC | Current and Voltage Rating |
|
|
|
|
• 5000 amps, 120/240VAC (2poles) | • |
|
|
|
|
• 5000 amps, 80VDC (2 poles) | 0.05 to 100 amps at 65 VDC |
|
|
|
|
| • 0.05 to 70 amps at 80 VDC |
|
|
|
|
Approvals* | • 0.05 to 50 amps at 250VDC |
|
|
|
|
• | • 0.05 to 50 amps at 300VDC |
|
|
|
|
C-UL recognized | • 0.05 to 70 amps at 240 VAC, 50/60 Hz |
|
|
|
• UL1077 recognized | • 0.05 to 50 amps at 277 VAC, 50/60 Hz |
|
|
|
• UL489A listed | • 0.05 to 50 amps at 277/480 VAC, 50/60 Hz |
|
|
|
• TUV approved | • 0.05 to 50 amps at 250 VAC, 400 Hz |
|
|
|
|
|
|
|
|
|
|
T/R/PP/PR/CPP/CPR/CR ( SNAPAK® ) | Interrupting Capacity |
|
|
|
|
| • |
|
|
|
|
General Description | 5000 amps, 240 VAC, 50/60 Hz |
|
|
|
|
• Compact magnetic-hydraulic circuit protector | • 1500 amps, 250 VAC, 400 Hz |
|
|
|
|
• Snap-acting trip mechanism increases operational life | • 7500 amps, 80 VDC |
|
|
|
|
• Aesthetically pleasing for front panel mounting | • 2000 amps, 240 VAC, 50/60 Hz (VDE) |
|
|
|
• Toggle, rocker, push-pull and push-to-reset actuation options | • 2000 amps, 415 VAC, 50/60 Hz (VDE) |
|
|
|
| • 4000 amps, 80 VDC (VDE) |
|
|
|
|
Max. Poles | • 1200 amps, 277/480 VAC, 50/60 Hz |
|
|
|
|
• 2 | • 5000 amps, 250VDC |
|
|
|
|
| • 1000 amps, 300VDC |
|
|
|
|
Current and Voltage Rating |
|
|
|
|
|
• | Approvals* |
|
|
|
|
0.10 to 7.5 amps at 50 VDC and 250 VAC | • |
|
|
|
|
• 0.10 to 30 amps at 32 VDC | UL recognized |
|
|
|
|
• 0.10 to 30 amps at 120 VAC | • CSA certified |
|
|
|
|
• 0.10 to 25 amps at 120/240 VAC (two poles) | • VDE approved (IEL) |
|
|
|
|
• 0.10 to 20 amps at 250 VAC (50/60 Hz, at 500AIC) | • CE compliant (IEL) |
|
|
|
|
• 0.10 to 20 amps at 65 VDC [two poles, at 500AIC] | • CCC approved |
|
|
|
|
| • UL 1500 certified |
|
|
|
|
Interrupting Capacity | • QPL to MIL-PRF- 5562 |
|
|
|
|
• |
|
|
|
|
|
1000 amps | General Description |
|
|
|
|
| •LEL versions meet IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950 and VDE 0730, 0804 and 0805 |
Approvals* | •Multi-pole options with multi or single handle |
|
|
|
• | •Auxiliary switch options |
|
|
|
|
UL recognized | •Snap-in mounting option |
|
|
|
|
• CSA certified | •Mid-trip handle option |
|
|
|
|
• TUV approved | •Various actuator options |
|
|
|
|
• CE compliant | •Dual frequency delay options |
|
|
|
|
• CCC approved |
|
|
|
|
|
| Max. Poles |
|
|
|
|
AP/UP, AP-MIL | •3 |
|
|
|
|
|
|
|
|
|
|
General Description | Current and Voltage Rating |
|
|
|
|
• QPL to MIL-PRF-39019 | • |
|
|
|
|
• Sealed magnetic-hydraulic circuit protection | 0.05 to 100 amps at 80 VDC |
|
|
|
|
• Can withstand 100G shock repeatedly | •0.05 to 50 amps at 125 VAC, 50/60 Hz |
|
|
|
|
• Tolerates 10G vibration from 10 to 2000 Hz under full load | •0.05 to 80 amps at 120/240 VAC, 50/60 Hz |
|
|
|
• Ideal for use in Class 1, Div. 2 Groups A, B, C and D hazardous locations | •0.05 to 100 amps at 80 VDC (VDE) |
|
|
|
|
| •0.05 to 50 amps at 250 VAC (VDE) |
|
|
|
|
Max. Poles |
|
|
|
|
|
• | Interrupting Capacity |
|
|
|
|
3 | •50000 amps 80 VDC |
|
|
|
|
| •5000 amps, 125 VAC, 120/240 VAC 50/60 Hz |
|
|
|
Current and Voltage Rating | •2000 amps, 80 VDC |
|
|
|
|
AP ratings | •2000 amps, 250 VAC, 50/60 Hz (VDE) |
|
|
|
|
• 0.05 to 20 amps at 50 VDC and 240 VAC | •10000 amps, 120/240VAC, 50/60 Hz |
|
|
|
|
|
|
|
|
|
|
UP ratings (single pole only) | Approvals* |
|
|
|
|
• 0.05 to 20 amps at 50 VDC | • |
|
|
|
|
• 0.05 to 15 amps at 120 VAC | UL 489 listed |
|
|
|
|
• 0.05 to 7.5 amps at 240 VAC | •CSA certified |
|
|
|
|
| •VDE approved |
|
|
|
|
Interrupting Capacity | •CE compliant |
|
|
|
|
AP ratings | •CCC approved |
|
|
|
|
• 500 amps, 50 VDC, 120 VAC |
|
|
|
|
|
• 300 amps, 240 VAC | IULP/LELP/CELP |
|
|
|
|
|
|
|
|
|
|
UP ratings | General Description |
|
|
|
|
• 1000 amps, 50VDC, 240 VAC | •Unique, parallel current sensing design |
|
|
|
| •Compact size, high current capacity |
|
|
|
Approvals* | •Auxiliary switch options |
|
|
|
|
• | •Mid-trip handle option |
|
|
|
|
MIL-PRF-M39019 |
|
|
|
|
|
• UL recognized (UP type only) | Max. Poles |
|
|
|
|
• FM approved (UP type only) | •1 |
|
|
|
|
|
|
|
|
|
|
IPA/CPA | Current and Voltage Rating |
|
|
|
|
General Description | • |
|
|
|
|
• Compact magnetic-hydraulic circuit protection | 125 amps at 80 VDC† |
|
|
|
|
• Quick-connect, screw, PC board mount terminals | • 150 amps at 80 VDC† |
|
|
|
|
• Auxiliary switch options | • 175 amps at 80 VDC† |
|
|
|
|
• Multi-pole options with multi or single handle | • 200 amps at 80 VDC† |
|
|
|
|
| • 250 amps at 80 VDC† |
|
|
|
|
Max. Poles | • |
|
|
|
|
• 3 | 251 - 300 amps at 80 VDC†† |
|
|
|
|
|
|
|
|
|
|
Current and Voltage Rating | † Two paralleled poles |
|
|
|
|
• | †† Three paralleled poles |
|
|
|
|
0.05 to 30 amps at 65 VDC |
|
|
|
|
|
• 0.05 to 20 amps at 80 VDC (300 AIC) | Interrupting Capacity |
|
|
|
|
• 0.05 to 25 amps at 250 VAC, 50/60 Hz | • |
|
|
|
|
• 25.1 to 30 amps at 240 VAC, 50/60 Hz | 10000 amps, 80 VDC |
|
|
|
|
• 0.10 to 15 amps at 250 VAC, 400 Hz | • 50000 amps, 65 VDC (up to 150 amps) |
|
|
|
• 0.05 to 25 amps at 65 VDC (TUV) | • 10000 amps, 80 VDC (> 150 amps) |
|
|
|
• 0.05 to 25 amps at 250 VAC, 50/60 Hz (TUV) |
|
|
|
|
|
• 0.05 to 15 amps at 250 VAC, 400 Hz (TUV) | Approvals* |
|
|
|
|
| • |
|
|
|
|
Interrupting Capacity | UL 489 listed |
|
|
|
|
• | • UL 489A listed |
|
|
|
|
1000 amps | • CSA certified |
|
|
|
|
|
|
|
|
|
|
Approvals* | IALR/IULR/IELR |
|
|
|
|
• |
|
|
|
|
|
UL 489A listed (CPA) | General Description |
|
|
|
|
• UL recognized | •Meets IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950, and VDE 0730, 0804 and 0805 |
• CUR recognized | •Designed to mount on standard 35mm DIN rails |
|
|
|
• TUV certified |
|
|
|
|
|
• CE compliant | Max. Poles |
|
|
|
|
• CCC approved (pending) | • |
|
|
|
|
| 4 |
|
|
|
|
General Description |
|
|
|
|
|
•IEG versions meet IEC spacing requirements for installation in equipment that must comply with IEC 601 and 950, and VDE 0730, 0804, and 0805 | Current and Voltage Rating |
|
|
|
|
•Multi-pole options with multi or single handle | •.050 to 70 amps at 80 VDC |
|
|
|
|
•Auxiliary switch options | •.050 to 70 amps at 250 VAC, 50/60 Hz |
|
|
|
|
•Mid-trip handle option | •.100 to 50 amps at 80 VDC (VDE) |
|
|
|
|
•Snap-in mounting option | •.100 to 50 amps at 250 VAC, 50/60 Hz (VDE) |
|
|
|
•Dual frequency delay options | •.100 to 30 amps at 415 VAC, 50/60 Hz (VDE) |
|
|
|
|
|
|
|
|
|
Max. Poles | Interrupting Capacity |
|
|
|
|
•6 | •7500 amps, 80 VDC |
|
|
|
|
| •5000 amps, 250 VAC, 50/60 Hz |
|
|
|
|
Current and Voltage Rating | •2000 amps, 277 VAC, 50/60 Hz |
|
|
|
|
• | •2000 amps at 250 VAC, 50/60 Hz (VDE) |
|
|
|
|
0.05 to 50 amps at 80 VDC | •2000 amps at 415 VAC, 50/60 Hz (VDE) |
|
|
|
|
•0.05 to 50 amps at 240 VAC | •4000 amps at 80 VDC (VDE) |
|
|
|
|
•0.05 to 30 amps at 277 VAC, 50/60 Hz |
|
|
|
|
|
•0.05 to 30 amps at 250 VAC, 400 Hz | Approvals* |
|
|
|
|
•0.05 to 30 amps at 125 VAC, 50/60 Hz | • |
|
|
|
|
•1 to 30 amps at 120/240 VAC, 50/60 Hz | UL recognized |
|
|
|
|
| •CSA certified |
|
|
|
|
Interrupting Capacity | •VDE approved (IELR) |
|
|
|
|
• | •CE compliant |
|
|
|
|
5000 amps, 240 VAC, 50/60 Hz |
|
|
|
|
|
•1500 amps, 250 VAC, 400 Hz | 209/219/229/279 |
|
|
|
|
•7500 amps, 80 VDC (IEG) |
|
|
|
|
|
•5000 amps, 80 VDC (CEG) | General Description |
|
|
|
|
•2000 amps, 250 VAC, 50/60 Hz (VDE) | •Front or back connected terminal styles |
|
|
|
|
•4000 amps, 80 VDC (VDE) | •E-frame style model complies with UL 489 |
|
|
|
•5000 amps, 125 VAC, 50/60 Hz (LEG) | •249 Power Selector Breaker system is listed as a branch circuit breaker per UL 489 |
|
•5000 amps, 120/240 VAC, 50/60 Hz (LEG) | •Complies with international requirements |
|
|
|
|
| •279 complies with UL 489A |
|
|
|
|
Approvals* |
|
|
|
|
|
• | Max. Poles |
|
|
|
|
UL 489 listed (LEG) | •6 |
|
|
|
|
•UL 489A listed (CEG) |
|
|
|
|
|
•UL recognized | Current and Voltage Rating |
|
|
|
|
•CSA certified | •.100 to 100 amps at 160 VDC |
|
|
|
|
•VDE approved (IEG, CEG, LEG) | •.100 to 125 amps at 125 VDC |
|
|
|
|
•CE compliant | •.100 to 77 amps at 600 VAC |
|
|
|
|
•CCC approved | •.100 to 100 amps at 347/600 VAC |
|
|
|
|
•UL 1500 certified | •.100 to 100 amps at 120, 240, 277, 480 VAC |
|
|
|
•QPL to MIL-PRF-55629 | •.100 to 100 amps, 125 VDC, 240/415 VAC (VDE) |
|
|
|
|
|
|
|
|
|
MDS & MDS2 | Interrupting Capacity |
|
|
|
|
| •5000 amps |
|
|
|
|
General Description | •10000 amps |
|
|
|
|
•Modular Distribution System provides unprecedented flexibility | •4000 amps (VDE) |
|
|
|
|
•“Hot Plug” modules allow for equipment expansion without power shutdown |
|
|
|
|
•Unique alarm conductors simplify signal wiring | Approvals* |
|
|
|
|
• | • |
|
|
|
|
Modular load terminals available with front or rear access | UL 489 listed |
|
|
|
|
| •UL 489A listed (279) |
|
|
|
|
Max. Poles | •UL recognized |
|
|
|
|
• | •CSA certified |
|
|
|
|
24 | •VDE approved |
|
|
|
|
| •UL1500 certified |
|
|
|
|
Current and Voltage Rating | •CCC approved |
|
|
|
|
• | •CE compliant |
|
|
|
|
Maximum load bus rating per position is 100 amps, 125VDC |
|
|
|
|
PGFM | JAE/JRE/JTE/JLE |
|
|
|
|
|
|
|
|
|
|
General Description | General Description |
|
|
|
|
•GFCI sensing module designed to operate in tandem with the LEL series circuit breaker with a shunt voltage trip and auxiliary switch | •F-frame style complies with UL 489 |
|
|
|
|
•Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | •Various terminal options for design flexibility |
|
|
|
•Automatic and manual reset configurations | •Reduced voltage drop through the circuit breaker compared to other protective devices |
|
•Power and fault status indicators | •Auxiliary switch options |
|
|
|
|
•Double insulated user interface | •Mid-trip handle options |
|
|
|
|
|
|
|
|
|
|
Max. Poles‡ | Max. Poles |
|
|
|
|
• | • |
|
|
|
|
3 | 6 |
|
|
|
|
|
|
|
|
|
|
‡ Number of circuit breaker poles | Current and Voltage Rating |
|
|
|
|
| UL489 |
|
|
|
|
Ground Trip Current | •100 to 250 amps at 160 VDC |
|
|
|
|
•4 to 6 mA | •100 to 250 amps at 65 VDC |
|
|
|
|
| •100 to 250 amps at 125/250 VDC |
|
|
|
|
Trip Time, Combined Assembly | •100 to 250 amps at 240 VAC |
|
|
|
|
•≤ 25 mS |
|
|
|
|
|
| UL489A |
|
|
|
|
Rated Voltage | •275 to 800 amps at 160 VDC |
|
|
|
|
•120 VAC or 240 VAC, 50/60 Hz | •275 to 1200 amps at 65 VDC |
|
|
|
|
|
|
|
|
|
|
Let-Go Voltage | Interrupting Capacity |
|
|
|
|
• | • |
|
|
|
|
60% of supply voltage | 10000 amps, 160 VDC |
|
|
|
|
| •10000 amps, 125/250 VDC |
|
|
|
|
Interrupting Capacity | •65000 amps, 65 VDC |
|
|
|
|
• | •10000 amps, 240 VAC |
|
|
|
|
As per rating of Airpax™ LEL series | •18000 amps, 240 VAC |
|
|
|
|
| •100000 amps, 65VDC (UL489A up to 800 amps) |
|
|
|
Approvals* |
|
|
|
|
|
• | Approvals* |
|
|
|
|
UL 943, Class A or | • |
|
|
|
|
•UL 1053 Compliant | UL 489 listed |
|
|
|
|
!5 Amp PGFP Plug Series | •UL 489A listed |
|
|
|
|
| •UL recognized |
|
|
|
|
General Description | •CSA certified |
|
|
|
|
•15 amp plug cordset GFCI series | •VDE approved |
|
|
|
|
•Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | •CCC approved |
|
|
|
|
•Automatic and manual reset configurations | •CE compliant |
|
|
|
|
•Available as a field wireable plug or with attached cords and outlets |
|
|
|
|
•Plug assembly with power single or tri-tap outlet | 30 Amp PGFI Portable Series, Multi-Phase |
|
|
|
|
•Electro-magnetically latched contacts |
|
|
|
|
|
| General Description |
|
|
|
|
Rated Current | •30 amp multi-phase cordset GFCI series |
|
|
|
|
•Up to 15 amps at 120 VAC, 50/60 Hz | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
| •Automatic and manual reset configurations |
|
|
|
Ground Trip Current | •Dual indication lights displaying power and fault status |
|
|
|
•4 to 6 mA | •Grounded and open neutral protected |
|
|
|
|
| •Electro-magnetically latched contacts |
|
|
|
|
Insulation Voltage |
|
|
|
|
|
•1500 VRMS - 1 minute | Rated Current |
|
|
|
|
| •Up to 30 amps |
|
|
|
|
Endurance Operations |
|
|
|
|
|
• | Rated Voltage |
|
|
|
|
3000 operations | •120/240 VAC dual voltage, 120/208 VAC 3Ø, 240 VAC 3Ø, 208 VAC 3Ø, 277 VAC 3Ø (non-UL or CSA) |
|
|
|
|
|
|
Construction | Operating Voltage Range |
|
|
|
|
• | •85% to 110% of rating |
|
|
|
|
NEMA 3R rated |
|
|
|
|
|
| Ground Trip Current |
|
|
|
|
Approvals* | • |
|
|
|
|
• | 4 to 6 mA |
|
|
|
|
cULus 943, Class A or |
|
|
|
|
|
•UL recognized | Construction |
|
|
|
|
15 Amp PGFI In-line Series | • |
|
|
|
|
| NEMA 4X and 6P wet location rated |
|
|
|
|
General Description |
|
|
|
|
|
•15 amp in-line cordset GFCI series | Approvals* |
|
|
|
|
•Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | • |
|
|
|
|
•Automatic and manual reset configurations | cULus 943, Class A |
|
|
|
|
•Available as a field wireable plug or with attached cords and outlets |
|
|
|
|
•Plug assembly with power single or tri-tap outlet | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
•Electro-magnetically latched contacts |
|
|
|
|
|
|
|
|
|
|
|
Rated Current |
|
|
|
|
|
•Up to 15 amps at 120 VAC, 50/60 Hz |
|
|
|
|
|
|
|
|
|
|
|
Ground Trip Current |
|
|
|
|
|
•4 to 6 mA |
|
|
|
|
|
|
|
|
|
|
|
Insulation Voltage | 227 |
|
|
|
|
•1500 VRMS - 1 minute |
|
|
|
|
|
| 40, 50 & 60 Amp |
|
|
|
|
Endurance Operations | PGFI Portable Series |
|
|
|
|
• |
|
|
|
|
|
3000 operations | General Description |
|
|
|
|
| •40, 50 & 60 amp in-line ELCI series |
|
|
|
|
Construction | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
• | •Automatic and manual reset key switch selector |
|
|
|
NEMA 3R rated | •Fault theshold key switch selector |
|
|
|
|
| •Available with locking connectors/ plugs or flying leads |
|
|
|
Approvals* | •Electro-magnetically latched contacts |
|
|
|
|
• |
|
|
|
|
|
cULus 943, Class A | Rated Current |
|
|
|
|
•cCSAus certified to CSA-C22.2 No. 144 or | •40, 50 or 60 amps |
|
|
|
|
UL recognized |
|
|
|
|
|
20 Amp PGFI Portable Series | Rated Voltage |
|
|
|
|
| •120 VAC, 240 VAC, 208 VAC, 277 VAC, |
|
|
|
|
General Description | 120/240 VAC, 3Ø 240 VAC, 3Ø 208 VAC, 3Ø 277 VAC, 3Ø 480 VAC, 3Ø 600 VAC |
|
•20 amp in-line cordset GFCI series |
|
|
|
|
|
•Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | Operating Voltage Range |
|
|
|
|
•Automatic and manual reset configurations | •85% to 110% of rating |
|
|
|
|
•Available with locking connectors / plugs or flying leads |
|
|
|
|
•Electro-magnetically latched contacts | Ground Trip Current Threshold |
|
|
|
|
| • |
|
|
|
|
Rated Current | Key switch selectable: 6, 10 and 30mA |
|
|
|
|
•Up to 20 amps |
|
|
|
|
|
| Construction |
|
|
|
|
Rated Voltage | • |
|
|
|
|
•120 VAC, 208 VAC, 240 VAC, 277 VAC | NEMA 4X wet location rated |
|
|
|
|
|
|
|
|
|
|
Operating Voltage Range | Approvals* |
|
|
|
|
•85% to 110% of rating | • |
|
|
|
|
| UL 1053 compliant |
|
|
|
|
Ground Trip Current | 30 Amp PGFS Permanent Series |
|
|
|
|
• |
|
|
|
|
|
4 to 6 mA | General Description |
|
|
|
|
| •30 amp splice-in GFCI series |
|
|
|
|
Construction | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
• | •Automatic and manual reset configurations |
|
|
|
NEMA 4X wet location rated | •Fault output options available |
|
|
|
|
| •Grounded and open neutral protected |
|
|
|
|
Approvals* | •Electro-magnetically latched contacts |
|
|
|
|
• |
|
|
|
|
|
cULus 943, Class A | Rated Current |
|
|
|
|
•cCSAus certified to CSA-C22.2 No. 144 | •Up to 30 amps |
|
|
|
|
30 Amp PGFI Portable Series |
|
|
|
|
|
| Rated Voltage |
|
|
|
|
General Description | •120 VAC, 208 VAC, 240 VAC, 120/240 VAC 277 VAC (non-UL) |
|
|
•30 amp in-line cordset GFCI series |
|
|
|
|
|
•Manufactured by North Shore Safety, Ltd., a leader in innovative safety products | Operating Voltage Range |
|
|
|
|
•Automatic and manual reset configurations | •85% to 110% of rating |
|
|
|
|
•Available with locking connectors / plugs or flying leads |
|
|
|
|
•Electro-magnetically latched contacts | Ground Trip Current |
|
|
|
|
| • |
|
|
|
|
Rated Current | 4 to 6 mA |
|
|
|
|
•Up to 30 amps |
|
|
|
|
|
| Construction |
|
|
|
|
Rated Voltage | • |
|
|
|
|
•120 VAC, 208 VAC, 240 VAC, 277 VAC | NEMA 4X and 6P wet location rated |
|
|
|
|
|
|
|
|
|
|
Operating Voltage Range | Approvals* |
|
|
|
|
•85% to 110% of rating | • |
|
|
|
|
| cULus 943, Class A |
|
|
|
|
Ground Trip Current |
|
|
|
|
|
•4 to 6 mA | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
| 30 Amp PGFS Permanent Series, Multi-Phase |
|
|
|
Construction |
|
|
|
|
|
• | General Description |
|
|
|
|
NEMA 4X and 6P wet location rated | •30 amp multi-phase splice-in GFCI series |
|
|
|
|
| •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
Approvals* | •Automatic and manual reset configurations |
|
|
|
• | •Dual indication lights displaying power and fault status |
|
|
|
cULus 943, Class A | •Grounded and open neutral protected |
|
|
|
|
•cCSAus certified to CSA-C22.2 No. 144 | •Electro-magnetically latched contacts |
|
|
|
|
SAS/SUS/SES |
|
|
|
|
|
| Rated Current |
|
|
|
|
General Description | •Up to 30 amps |
|
|
|
|
• Ultra-compact and ultra-light hydraulic- magnetic circuit protector |
|
|
|
|
• Trip-free function | Rated Voltage |
|
|
|
|
• Wiping-action, self-cleaning contacts | •120/240 VAC dual voltage, 120/208 VAC 3Ø, 240 VAC 3Ø, 208 VAC 3Ø, 277 VAC 3Ø (non-UL or CSA) |
• Slide actuator |
|
|
|
|
|
• | Operating Voltage Range |
|
|
|
|
PCB terminals | •85% to 110% of rating |
|
|
|
|
|
|
|
|
|
|
Max. Poles | Ground Trip Current |
|
|
|
|
• | • |
|
|
|
|
1 | 4 to 6 mA |
|
|
|
|
|
|
|
|
|
|
Current and Voltage Rating | Construction |
|
|
|
|
• | • |
|
|
|
|
0.100 to 15.0 amps at 125 VAC, 50/60 Hz | NEMA 4X and 6P wet location rated |
|
|
|
|
• 0.100 to 15 amps at 250 VAC, 50/60 Hz |
|
|
|
|
|
• 0.100 to 15 amps at 32 VDC | Approvals* |
|
|
|
|
• 0.100 to 15 amps at 50 VDC | • |
|
|
|
|
| cULus 943, Class A |
|
|
|
|
Interrupting Capacity |
|
|
|
|
|
• | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
500 amps | 40, 50 & 60 Amp |
|
|
|
|
| PGFS Permanent Series |
|
|
|
|
Approvals* |
|
|
|
|
|
• | General Description |
|
|
|
|
UL recognized | •40, 50 & 60 amp splice-in ELCI series |
|
|
|
|
• CSA certified | •Manufactured by North Shore Safety, Ltd., a leader in innovative safety products |
|
• VDE approved | •Automatic / manual reset key switch |
|
|
|
|
| •Fault trip level key switch |
|
|
|
|
SAR/SUR/SER | •Keyed power switch |
|
|
|
|
| •Dual indication lights displaying power and fault status |
|
|
|
General Description | •Grounded and open neutral protected |
|
|
|
|
•Ultra-compact and ultra-light hydraulic- magnetic circuit protector | •Electro-magnetically latched contacts |
|
|
|
|
•Trip-free function |
|
|
|
|
|
•Wiping-action, self-cleaning contacts | Rated Current |
|
|
|
|
•Rocker actuator | •40, 50 or 60 amps |
|
|
|
|
•.250” quick-connect or PCB terminals |
|
|
|
|
|
| Rated Voltage |
|
|
|
|
Max. Poles | •120 VAC, 240 VAC, 208 VAC, 277 VAC, |
|
|
|
|
•2 | 120/240 VAC, 3Ø 240 VAC, 3Ø 208 VAC, 3Ø 277 VAC, 3Ø 480 VAC, 3Ø 600 VAC |
|
|
|
|
|
|
|
Current and Voltage Rating | Operating Voltage Range |
|
|
|
|
•0.100 to 20.0 amps at 125 VAC, 50/60 Hz | •85% to 110% of rating |
|
|
|
|
•0.100 to 15 amps at 250 VAC, 50/60 Hz |
|
|
|
|
|
•0.100 to 15 amps at 32 VDC | Ground Trip Current |
|
|
|
|
•0.100 to 30 amps at 50 VDC** | • |
|
|
|
|
| 6 mA, 10 mA and 30mA |
|
|
|
|
** Agency Approvals Pending |
|
|
|
|
|
| Construction |
|
|
|
|
Interrupting Capacity | • |
|
|
|
|
•500 amps | NEMA 4X wet location rated |
|
|
|
|
|
|
|
|
|
|
Approvals* | Approvals* |
|
|
|
|
•UL recognized | • |
|
|
|
|
•CSA certified | UL 1053 compliant |
|
|
|
|
•VDE approved | PGFR Duplex Receptacle Series |
|
|
|
|
|
|
|
|
|
|
QAS/QAL/QFS/QFL | General Description |
|
|
|
|
| •15 / 20 amp duplex receptacle GFCI series |
|
|
|
General Description | •PGFR model - standard wall receptacle |
|
|
|
|
•Silver-link quick-action fuses | •Model has: Standard power indicator light Manual reset configuration TEST and RESET buttons |
•L-type terminals construction for easy installation |
|
|
|
|
|
•Resistive to repetitive currents | Rated Current |
|
|
|
|
•Low power loss | •15 / 20 amps |
|
|
|
|
•Excellent current-limiting characteristics |
|
|
|
|
|
•Available options include fuse holder indicator fuse, microswitch | Rated Voltage |
|
|
|
|
| •120 VAC |
|
|
|
|
Current and Voltage Rating |
|
|
|
|
|
QAS25 | Operating Voltage Range |
|
|
|
|
•20 to 100 amps at 250VAC, 300VDC | •85% to 110% of rating |
|
|
|
|
QAL25 |
|
|
|
|
|
•75 to 300 amps at 250VAC, 300VDC | Ground Trip Current |
|
|
|
|
QAS60 | •4 to 6 mA |
|
|
|
|
•20 to 75 amps at 600VAC, 500VDC |
|
|
|
|
|
QAL60 | Approvals* |
|
|
|
|
•100 to 300 amps at 600VAC, 500VDC | • |
|
|
|
|
QFS25 | UL recognized for use under cULus 943, Class A |
|
|
|
•10 to 100 amps at 250VAC, 400VDC |
|
|
|
|
|
QFL25 | •cCSAus certified to CSA-C22.2 No. 144 |
|
|
|
|
•75 to 300 amps at 250VAC, 400VDC |
|
|
|
|
|
|
|
|
|
|
|
Interrupting Capacity |
|
|
|
|
|
QAS25 |
|
|
|
|
|
•10KA at 250VAC, 300VDC |
|
|
|
|
|
QAL25 |
|
|
|
|
|
•10KA at 250VAC, 300VDC |
|
|
|
|
|
QAS60 |
|
|
|
|
|
•100KA at 600VAC,10KA at 500VDC |
|
|
|
|
|
QAL60 |
|
|
|
|
|
•100KA at 600VAC,10KA at 500VDC |
|
|
|
|
|
QFS25 |
|
|
|
|
|
•10KA at 250VAC, 400VDC |
|
|
|
|
|
QFL25 |
|
|
|
|
|
•10KA at 250VAC, 400VDC |
|
|
|
|
|
|
|
|
|
|
|
Approvals* |
|
|
|
|
|
• |
|
|
|
|
|
QFS25: CSA certified UL recognized, TUV |
|
|
|
|
|
General Description |
|
|
|
|
|
• High voltage DC switch |
|
|
|
|
|
• Compact design |
|
|
|
|
|
• Available options include remote signal disconnect and auxiliary switch |
|
|
|
|
|
|
|
|
|
|
Max. Poles |
|
|
|
|
|
• |
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
Current and Voltage Rating |
|
|
|
|
|
• |
|
|
|
|
|
Up to 30 amps at 300VDC, open voltage 450VDC |
|
|
|
|
• > 5000cycles at 2x per minute, at nominal current |
|
|
|
|
SARPV |
|
|
|
|
|
|
|
|
|
|
|
General Description |
|
|
|
|
|
•High voltage DC power switch |
|
|
|
|
|
•Compact design |
|
|
|
|
|
•Available options include remote signal disconnect and auxiliary switch |
|
|
|
|
|
|
|
|
|
|
Max. Poles |
|
|
|
|
|
•2 |
|
|
|
|
|
|
|
|
|
|
|
Current and Voltage Rating |
|
|
|
|
|
•Up to 10 amps at 300VDC, open voltage 450VDC |
|
|
|
|
|
•> 5000cycles at 2x per minute, at nominal current |
|
|
|
|
ADDITIONAL PRODUCTS |
|
|
|
|
|
|
|
|
|
|
|
General Description |
|
|
|
|
|
•AIRPAX™ & KLIXON™ Bimetal Thermostats |
|
|
|
|
|
•KLIXON™ Air Flow Sensors |
|
|
|
|
|
•AIRPAX™ Temperature Sensors |
|
|
|
|
|
•KLIXON™ Aircraft Circuit Breakers |
|
|
|
|
|
•KLIXON™ Thermal Circuit Breakers |
|
|
|
|
|
DIMENSIONS™ |
|
|
|
|
|
DC TO AC INVERTERS |
|
|
|
|
|
|
|
|
|
|
|
General Description |
|
|
|
|
|
•AIRPAX™ APG/UPG Series |
|
|
|
|
|
•AIRPAX™ APL/UPL/205 Series |
|
|
|
|
|
•AIRPAX™ 203 Series |
|
|
|
|
|
EXISTING-DESIGN PRODUCTS |
|
|
|
|
|
|
|
|
|
|
|
General Description |
|
|
|
|
|
•Mobile AC Power |
|
|
|
|
|
•International Standby Power |
|
|
|
|
|
•Traffic Signal Backup |
|
|
|
|
|
•Industrial (High Voltage) |
|
|
|
|
|
•Military |
|
|
|
|
|
SERIES |
|
|
|
|
|
15M020D |
|
|
|
|
|
26M048B |
|
|
|
|
|
26M024B |
|
|
|
|
|
35M048B |
|
|
|
|
|
35M024B |
|
|
|
|
|
35M020B |
|
|
|
|
|
35L048B |
|
|
|
|
|
35L024B |
|
|
|
|
|
35L020B |
|
|
|
|
|
42M048C |
|
|
|
|
|
42M100B |
|
|
|
|
|
57L048B |
|
|
|
|
|
57M024B |
|
|
|
|
|
57M048B |
|
|
|
|
|
60L048B |
|
|
|
|
|
60L024B |
|
|
|
|
|
4SQ |
|
|
|
|
|
4SHG (46mm) |
|
|
|
|
|
4SHG (56mm) |
|
|
|
|
|
26M048B-V |
|
|
|
|
|
35M048B-X |
|
|
|
|
|
42M048C-R |
|
|
|
|
|
42M048C-Z |
|
|
|
|
|
K & L 92100 |
|
|
|
|
|
K & L 92200 |
|
|
|
|
|
L92400 |
|
|
|
|
|
|
|
|
|
|
|
Series 15M020D Stepper Motors |
|
|
|
|
|
15M020D1B |
|
|
|
|
|
Series 26M048B Stepper Motors |
|
|
|
|
|
26M048B1U | 26M048B2U | 26M048B1B | 26M048B2B |
|
|
Series 26M024B Stepper Motors |
|
|
|
|
|
26M024B1U | 26M024B2U | 26M024B1B | 26M024B2B |
|
|
Series 35M048B, 35M024B & 35M020B Stepper Motors |
|
|
|
|
35M048B1U | 35M048B2U | 35M024B1U | 35M024B2U | 35M020B1U | 35M020B2U |
Series 35L048B, 35L024B & 35L020B Stepper Motors |
|
|
|
|
35L048B1U | 35L048B2U | 35L024B1U | 35L024B2U | 35L020B1U | 35L020B2U |
Series 42M048C Stepper Motors |
|
|
|
|
|
42M048C1U | 42M048C2U | 42M048C1B | 42M048C2B |
|
|
Series 42M100B Stepper Motors |
|
|
|
|
|
42M100B1U | 42M100B2U | 42M100B1B | 42M100B2B |
|
|
Series 57L048B, 57M024B & 57M048B Stepper Motors |
|
|
|
|
57L048B1U | 57L048B2U | 57M024B1U | 57M024B2U | 57M048B1U | 57M048B2U |
Series 60L048B & 60L024B Stepper Motors |
|
|
|
|
|
60L048B1U | 60L048B2U | 60L024B1U | 60L024B2U |
|
|
Series 4SQ Stepper Motors 1.8° |
|
|
|
|
|
4SQ - 120B34S |
|
|
|
|
|
Series 4SHG Stepper Motors 1.8° |
|
|
|
|
|
4SHG | 4SHG | 4SHG | 4SHG | 4SHG | 4SHG |
060A46S | 120A46S | 240A46S | 060A56S | 120A56S | 240A56S |
Series 26M048B Stepper Motors With Gear Trains (Type V) |
|
|
|
|
26M048B1U | 26M048B2U | 26M048B1B | 26M048B2B |
|
|
Series 35M048B Stepper Motors With Gear Trains (Type X) |
|
|
|
|
35M048B1U | 35M048B2U | 35M048B1B | 35M048B2B |
|
|
Series 42M048C Stepper Motors With Gear Trains (Type R) |
|
|
|
|
42M048C1B | 42M048C2B | 42M048C1U | 42M048C2U |
|
|
Series 42M048C Stepper Motors With Gear Trains (Type Z) |
|
|
|
|
42M048C1B | 42M048C2B | 42M048C1U | 42M048C2U |
|
|
Series K92100 & L92100 Digital Linear Actuators |
|
|
|
|
|
K92111-P1 |
|
|
|
|
|
K92111-P2 |
|
|
|
|
|
L92111-P1 |
|
|
|
|
|
L92111-P2 |
|
|
|
|
|
K92121-P1 |
|
|
|
|
|
K92121-P2 |
|
|
|
|
|
L92121-P1 |
|
|
|
|
|
L92121-P2 |
|
|
|
|
|
K92141-P1 |
|
|
|
|
|
K92141-P2 |
|
|
|
|
|
L92141-P1 |
|
|
|
|
|
L92141-P2 |
|
|
|
|
|
Series K92200 & L92200 Digital Linear Actuators |
|
|
|
|
|
K92211-P1 |
|
|
|
|
|
K92211-P2 |
|
|
|
|
|
L92211-P1 |
|
|
|
|
|
L92211-P2 |
|
|
|
|
|
K92221-P1 |
|
|
|
|
|
K92221-P2 |
|
|
|
|
|
L92221-P1 |
|
|
|
|
|
L92221-P2 |
|
|
|
|
|
K92231-P1 |
|
|
|
|
|
K92231-P2 |
|
|
|
|
|
L92231-P1 |
|
|
|
|
|
L92231-P2 |
|
|
|
|
|
Series L92400 Digital Linear Actuators |
|
|
|
|
|
L92411-P1 |
|
|
|
|
|
L92411-P2 |
|
|
|
|
|
L92421-P1 |
|
|
|
|
|
L92421-P2 |
Không có nhận xét nào:
Đăng nhận xét